ONE-UP® Pump Diaphragms Technical Information

Field Testing/Long Service Life

ONE-UP® pump diaphragms have been extensively field tested in a variety of industries including food & beverage processing, pharmaceuticals, paint, solvent and detergent manufacturing and wastewater treatment. Available test results demonstrate the versatility of these diaphragms, and explain their advantage in length of service life.

Property ASTM Method Sample Dimensions (thickness) Conventional PTFE (Literature) Gore PTFE
(Test Data)
Flex Life
(MM cycles)
ASTM-D-2176 0.020in  0.600in 4.1 70+*
Impact Strength
(ft lbs/in)
ASTM-D-256 0.220 in 2 – 3.5

Tensile Strength (psi) ASTM-D-638 0.220 in 4000-5200 14920
Mullins Burst (psi) ASTM-D-3786 0.020 in 180** 540
Tensile Creep
(1000 hr  1000 psi)
ASTM-D-2990 0.100 in 20%-30%** 9%-10%
Sample dimensions are given to compare conventional PTFE to Gore's PTFE for testing purposes and do not represent actual diaphragm dimensions.
* Test was stopped over time
** Actual test results for conventional PTFE film.

One-Up® Pump DiaphramsEasy Installation
Since the ONE-UP® pump diaphragm is a one-piece design, it is simple to install. Whether it incorporates bolt holes or a perimeter sealing bead, it fits easily into the pump housing without the difficulties associated with installing two-piece diaphragm sets.

Satisfaction Guaranteed
We guarantee your satisfaction. If, on your initial order, you are not satisfied with the performance-in-use of the diaphragms, return them to us for a full refund of purchase price.

Go Back Go Back

Warning - Properties/applications shown throughout this Website are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations, consult Beacon Gasket & Seals Co. Failure to select the proper sealing products could result in property damage and/or serious person injury. Performance data published in this Website has been developed from field testing, customer field reports and/or in-house testing. While the utmost care has been used in developing this Website, we assume no responsibility for errors. Specifications subject to change without notice.